Safety Training Courses for Refresher Training or Newcomers in the Sunraysia, Mildura area.
Group training only at your workplace: Group up to 12 students – minimal charges apply.
Platinum Safety and Training can address all your safety training requirements. We offer onsite training at your workplace anywhere in Sunraysia, Mildura area, we will ensure you receive the very best training and information for you and your staff. We are a Registered Training Organisation, (RTO # 41312) therefore, all our training is nationally recognised throughout Australia ensuring your workplace will remain a safe and compliant one. We specialise is training areas such as:
- Confined space entry, gas testing, permit issuing, breathing apparatus and confined space rescue
- Working at heights, height safety supervision (rescue) and elevated work platforms under 11m
- First aid training, including CPR, first aid and low voltage rescue
- Fire emergency warden & fire extinguisher training
We provide newcomers and those just needing a refresher with training that is practical and goes in depth on how to stay safe. There is no better way to teach you than to show you, that’s why we take onsite training seriously. Unlike others, we don’t believe in extensive theory, we want you to learn practical skills that you can take out onto the job and use. If you would like to know more or just need some refresher training in one of the areas we cover, start a conversation with us today and find out what Platinum Safety and Training can do to help you.
Confined space
Confined space training
Onsite group training
Sunraysia – Mildura and surrounding areas
Do I require training to carry out works in a confined space?
The simple answer is YES! Here at Platinum Safety and Training, we make it easy when it comes to deciding what training you need to carry out work in a confined space. We have a range of confined space training courses to suit everyone.
Day 1 – (Workers & Standby operators). If you are someone who will be entering and working in the confined space, you will need the basic training course to understand the hazards and risks, work in accordance with legislation, understand permit systems and act as the Mandatory Standby/spotter for confined space workers. Units of competency covered in our Day 1 training course:
- RIIWHS202E Enter and work in confined spaces which is the minimum requirement for all workers entering and working in any confined space. The learning outcomes include, confined space awareness, legislative requirements, hazard and risk controls, tools and equipment, entry, exit and clean up procedures.
- MSMPER200 Work in accordance with an issued permit provides understanding and training on how permit systems work and to maintain a safe and compliant workplace.
- MSMPER202 Observe permit work allows the workers to act as the standby/spotter to ensure all workers inside the confined space are safe and conditions of the work permits are followed.
Day 1 + Gas tester – Confined spaces have many hazards, however unsafe atmospheres are one of the most dangerous hazards you may face when working in confined spaces. This training program is an extension of the confined space entry course with a comprehensive understanding on how to check and use gas detectors correctly, to ensure the atmosphere remains safe at all times during confined space works.The additional unit of competency covered in this course is:
- MSMWHS217 Gas test atmospheres will enable the operator to test atmospheres using a range of testing equipment in order to determine a safe atmosphere for workers. The competency requires the operator to safely take and interpret gas readings and take the appropriate actions.
Day 2 – (Confined space supervisors). All confined space works must have a minimum amount of control measures to keep workers safe. A person in direct control is required to ensure this happens and they are known as the “permit issuer”. The will have the competencies to carry out risk assessment, understand atmospheric monitoring and issue all work permits including the mandatory “Confined space entry permit”. This training course is for anyone who will be supervising and controlling confined space works. Units of competency covered in our Day 2 training course:
- MSMWHS201 Conduct hazard analysis & RIIRIS201E Conduct local risk control which will cover hazard and risk identification within the workplace, including creation and implementation of hazard analysis tools such as
* Job safety analysis (JSA)
* Safe work method statement (SWMS) - MSMPER300 Issue work permits, covers the understanding and limitations of the permit system. As the competent permit issuer, you will be making decisions regarding the need for permits and ensure the conditions are implemented.
- MSMWHS217 Gas test atmospheres will enable the operator to test atmospheres using a range of testing equipment in order to determine a safe atmosphere for workers. The competency requires the operator to safely take and interpret gas readings and take the appropriate actions.
Days 3 & 4 – (Confined space rescuer). This training course will cover the use of breathing apparatus & confined space rescue. This will enable you to be a competent member of the standby rescue team, which is a mandatory requirement for every confined space entry.Units of competency covered in our Day training course:
- MSMWHS216 Operate breathing apparatus will provide the skills to operators to check and safely use open circuit self contained breathing apparatus when atmospheres may pose a significant risk to safety during confined space operations.
- PUASAR025 Undertake confined space rescue will enable operators to be part of the standby rescue team. In the event of an emergency, confined space rescue operators must be able to rapidly extricate trapped or unconscious workers in any confined space situation.
Get in contact with us! Call: 1300 027 057 or Email: info@platinumsafety.com.au
Prices:
Prices can vary depending on the course you want to complete and the number of people completing the training. As a guide, please see the price list below:
ONSITE TRAINING AT YOUR WORKPLACE PRICES: (Sunraysia, Mildura and surrounds):
Prices: On application
Height safety training
Onsite group training
Sunraysia – Mildura and surrounding areas
Get in contact with us! Call: 1300 027 057 or Email: info@platinumsafety.com.au
Prices:
Prices can vary depending on the course you want to complete and the number of people completing the training. As a guide, please see the price list below:
ONSITE TRAINING AT YOUR WORKPLACE PRICES: (Sunraysia, Mildura and surrounds):
Prices: On application
Elevated Work Platform training
1 Day – Nationally Recognised Training
EWP under 11 metres
Sunraysia – Mildura and surrounding areas
This training course will give workers the skills and knowledge to operate elevated work platforms (Boom Lifts (BL) Scissor Lifts (SL), Vertical Lifts (VL) under 11 metres. Please note, this is not a high risk work licence for EWP’s over 11 metres. Platinum Safety’s EWP training course is the nationally recognised unit of competency. It is recognised and accepted throughout Australia. Many people may believe you must have completed a “Yellow Card” which are issued by companies outside of the VET system. The Yellow Card is not a requirement to operate an EWP or scissor lift. This is a common misconception.
Platinum safety and training is your professional provider of a working at heights and elevated work platform courses in Sunraysia, Mildura and surrounding areas, helping you to perform work with the necessary knowledge you need to stay safe.
Course Content
Key skills and knowledge covered during this training course through a combination of both theory and practical applications.
- Elevating work platforms documentation
- Understanding work requirements
- Correct selection and use of personal protective equipment (PPE)
- Perform pre-start and post-start inspections/checks. Documentation process for any faults or non compliance.
- Coordinate activities with others prior to commencement of, and during, the work activity
- Hazard identification, potential risks and implementation of control measures
- Preparation for emergency procedures.
- Use approved safety devices, ensure safety of personnel and surrounding site
- Report on monitoring systems and alarms
- Complete work and shut-down procedures inline with the agreed work plan
- Carry out work platform inspections
- Carry out routine operational servicing, lubrication and housekeeping tasks in accordance with manufacturer’s instructions
- Carry out minor operator maintenance to manufacturer’s instructions and site requirements
- Process written records
- Check, clean, maintain and store plant, tools and equipment as per manufacturing specifications
Suited for you
There is no prerequisite for this course, so it is perfect for anyone who wants to gain experience and practical knowledge that can be used on a worksite.
Successful completion of this training will be awarded the statement of attainment for:
RIIHAN301E Operate Elevating Work Platform
The course consists of both theory and practical, including theory and practical assessments. The programme is conducted over a day and takes up to 8 hours to complete.
PRICES:
Prices can vary depending on the course you want to complete and the number of people completing the training. As a guide, please see the price list below:
ONSITE TRAINING AT YOUR WORKPLACE PRICES: (Sunraysia, Mildura and surrounds):
Prices: On application
Fire emergency training
Fire warden, chief warden, fire extinguisher training
Onsite group training
Sunraysia – Mildura and surrounding areas
Do I require training to control a small workplace emergency?
The simple answer is YES! Here at Platinum Safety and Training, we make it easy when it comes to deciding what training you need to ensure your workplace remains complaint and prepared for any workplace emergency. We have a range of fire emergency training courses to suit your workplace.
Fire extinguisher training: A fast training course to give your team the skills and confidence to quickly assess a range of small emergencies within the workplace and act swiftly to contain and control with minimal risk and disruption to your business. Click for more information
Fire warden + Fire extinguisher training: Every workplace requires to have a plan in place to deal with any workplace emergency. This training course will assist your employees with the skills and knowledge to work effectively as an emergency response team known as the “Emergency Control Organisation” (ECO). They will know the procedures on raising alarms, containing emergencies, the co-ordination of evacuation procedures and safely extinguishing small fires. As these are nationally recognised units of competency, it will also ensure your workplace is complaint under the Australian Standard: AS3745:2010 Planning for emergencies in facilities. Click for more information
Fire warden + Chief warden and fire extinguisher training – In addition to the fire warden and fire extinguisher training, this training course also covers the all important requirement of the chief warden. All emergency control organisations (ECO) require leadership and `this is in the form of a chief/deputy chief warden. They will be require to co-ordinate the response of the wardens during an emergency and liaising with the appropriate emergency service officers. This training will ensure you have the right skills and confidence to ensure the safety of all wardens and staff onsite. Click for more information
Prices:
Prices can vary depending on the course you want to complete and the number of people completing the training. For a free quote, please contact us now.
First aid training
CPR, First aid & Low voltage rescue
Onsite group training
Sunraysia – Mildura and surrounding areas
RTO # 41312
Ambition training Pty Ltd
T/A Platinum Safety & Training
PLATINUM SAFETY & TRAINING
Monday - Friday 7:30 a.m – 5:30 pm
Head Office:
Platinum Safety Training Centre,
2 / 6 Weld st Prestons, NSW 2170
© 2019 Platinum Safety & Training